Corrects negative toe-out angle and improves the steering geometry and the steering behavior by positive Ackerman effect. Maneuverability and off-road ability are clearly optimized:
Price notice for European
and International orders:
- orders from/to EU countries will be charged including MwSt/VAT +shipping € 6,20
- INTERNAT. orders (outside EU) will be charged w/o MwSt/VAT + FREE SHIPPING
Welcome to the crawlster®4S steering system - the unique steering system for vehicles with Gmade GS01 chassis with which a correct steering geometry
(positive Ackerman effect) can be achieved simply and perfectly both with standard knuckles (plastic) as well as with tuning knuckles (aluminium).
With the crawlster®4S steering system your crawl, trail or scale-model with Gmade GS01 chassis gets a completely new turning performance - maneuverability and off-road capability and scale look will be significantly improved.
Content of the crawlster®4S
The front axle of Gmade GS01 CHASSIS is pivoted at the front - just like the original: the turning angle of the knuckles in the C-hub in this arrangement (A = curve outer wheel) is limited to about 32 ° / 42 ° (plastic / aluminium) in one direction. In the other direction (B = curve inner wheel) however, the knuckles in the C-hub have a substantially greater angle of freedom (theoretically ≥ 90 °). Perfect conditions for a positive Ackermann steering geometry.
The Gmade GS01 front suspension has as standard "inwardly" directed knuckle linking points. The crawlster®4S steering system, with its special geometry - together with special Ackerman conducive steering angles - has the knuckle pivot points (O) clearly "outside" of the C-hub pivot points (o), ie - like the original - as far as possible "outward" toward the rim. At the same time, the linking is nearly invisible above the leaf springs.
The crawlster®4S steering system makes optimal steering geometry and perfect scale looks possible for all Gmade GS01 front axles, by consistent integration of all relevant factors.
crawlster®4S-turning angle and steering frame
No steering bars in front of the axle
Universally mountable also on standard knuckles
Questions or suggestions? – please free to contact us – mail to firstname.lastname@example.org
The crawlster®4S steering system is suitable for all series front axles of Gmade GS01
Subject to technical change. For detailed compatibility information take a look at our datasheet.
DPMA protected. All rights reserved. Reproduction / distribution even in part only with express permission.
The vehicles shown on these website are not part of the crawlster®4S steering system and must be purchased separately.
This website has been compiled with the utmost care. Nevertheless, no guarantee can be given for the correctness of the information contained. Any liability for damages arising directly or indirectly from the use of this website or the vehicles / systems offered is excluded - unless they are based on intent or gross negligence.