...if you have any problems ordering at our INTERNATIONAL-menu – because the following payment-process comes in german - e.g. USA = Vereinigte Staaten etc. –please mail to email@example.com and we´ll fulfil any wish ;-)
Corrects negative toe-out angle and improves the steering geometry and the steering behavior by positive Ackerman effect. Maneuverability and off-road ability are clearly optimized:
Price notice for European
and International orders:
- orders from/to EU countries will be charged including MwSt/VAT +shipping € 6,20
- INTERNAT. orders (outside EU) will be charged w/o MwSt/VAT + FREE SHIPPING
Welcome to the crawlster®4S steering system - the unique steering system for vehicles with Gmade GS01 chassis with which a correct steering geometry
(positive Ackerman effect) can be achieved simply and perfectly both with standard knuckles (plastic) as well as with tuning knuckles (aluminium).
With the crawlster®4S steering system your crawl, trail or scale-model with Gmade GS01 chassis gets a completely new turning performance - maneuverability and off-road capability and scale look will be significantly improved.
Content of the crawlster®4S
crawlster®4S – New steering. For all Gmade GS01 chassis.
crawlster® without BTA – why?
The front axle of Gmade GS01 CHASSIS is pivoted at the front - just like the original: the turning angle of the knuckles in the C-hub in this arrangement (A = curve outer wheel) is limited to about 32 ° / 42 ° (plastic / aluminium) in one direction. In the other direction (B = curve inner wheel) however, the knuckles in the C-hub have a substantially greater angle of freedom (theoretically ≥ 90 °). Perfect conditions for a positive Ackermann steering geometry.
crawlster®4S – turned to the last degree!
The Gmade GS01 front suspension has as standard "inwardly" directed knuckle linking points. The crawlster®4S steering system, with its special geometry - together with special Ackerman conducive steering angles - has the knuckle pivot points (O) clearly "outside" of the C-hub pivot points (o), ie - like the original - as far as possible "outward" toward the rim. At the same time, the linking is nearly invisible above the leaf springs.
The crawlster®4S steering system makes optimal steering geometry and perfect scale looks possible for all Gmade GS01 front axles, by consistent integration of all relevant factors.
crawlster®4S-turning angle and steering frame
crawlster®4S – Really simple.
crawlster®4S – bring your Gmade GS01 closer to the original
No steering bars in front of the axle
Universally mountable also on standard knuckles
The crawlster®4S steering system is suitable for all series front axles of vehicles with Gmade GS01 CHASSIS. For detailed compatibility information take a look at our datasheet. crawlster®4S is DPMA protected. All rights reserved. Reproduction / distribution – even in part – only with express permission. The vehicles shown on these website are not part of the crawlster®4S steering system and must be purchased separately.
Header-Visuals: crawlster®, LWB© Scale Projects – with kind approval.